Showing posts with label Coat. Show all posts
Showing posts with label Coat. Show all posts

Sunday, October 16, 2016

Neue Mode 25054 : Drape coat



I've seen Neue Mode patterns before over on sewingpatterns.com and kinda wrote them off as being left over from the 80's. I did get an email recently though that had some new designs in it and fell in love with this coat, took me forever to find it on the website (it was listed as Non-categorized, after I'd been through a few hundred patterns looking for it......)

Its a bit sketchy ordering a neue mode pattern - no line drawings on most of the patterns and none of them actually list what pattern you get - so it could potentially be the pants or the top or the coat... This one thankfully had a line drawing, though its not very accurate, it shows the collar being a separate pattern piece but its just one front piece, the hem dips lower at the front plus the pattern has sleeve cuffs which aren't on the drawing, and it also has no pockets...
The cutting layout and amount of fabric is printed as part of the pattern and the pattern pieces also have basic fit adjustments printed on them which was kind of awesome.


Sizing - I made a sz 20/46, about 2 sizes smaller than I should have, but I was using a stretch fabric and I wanted more of a fitted cardigan/coat. I also didn't do my normal FBA because I figured I wouldn't need it with the drape front.
I'm really happy with the shaping - it has a great defined waist and I love the drape of the front.




Adjustments;
Size 20
Graded to a sz22 from the waist down
Narrowed shoulders by 1"
Added 1.5" to arm width
Added 1" to sleeve cap height
Chopped 12" from the length



Fabric:
A stretchy woven poly from the clearance table at Spotlight, it has a damask type pattern woven through.





The instructions are ok, very brief like a burda pattern. I decided to go for a deeper hem and topstitched it for the weight and stability it would give the hems.

All in all, I'm really happy with the coat and will have another crack at neue mode patterns in the future!

Wednesday, March 18, 2015

Grainline Studios 16001: Cascade Duffle Coat





I've been obsessed with duffle coats the last couple of months, I wanted a princess seam coat pattern and couldn't find one anywhere. In the end it came down between this pattern and Colette's Albion but I liked the details more on this one.

It ended up being an expensive pattern, about $19.50AUD for the pdf. As soon as I got it I stuck it together and made a muslin in a straight sz 18....and it looked horrible on me, the shoulders were huge but the arms were way too small, the waist was huge but the bust was too tight, it was bunching all around the armscye, the sleeve cap height was too short, the upper bust length was too short, the upper back was too tight.... I nearly threw it all in after that but since I spent so much on the pattern decided to chop into it and make it work (cue Tim Gunn's voice in my head!). And to be fair, I knew I would have to make fit adjustments since I am not the body shape Grainline seems to design for.


Pattern adjustments;
  • I made View A with the hood
  • Size 14 through the shoulders graded to a sz 16 at the hips
  • Narrowed the shoulders by a further 1/2"
  • Added front princess seams from Simplicity 2446 with the equivalent of a 1.5" FBA
  • Changed the armscye  by also using S2446
  • Added to the upper sleeve width and to the sleeve cap (approx. 2" to each)
  • Wide back adjustment 1.5"
  • Added a centre back seam
  • I did leave the shoulder yokes and the hood alone.





The good;
  • I'm really happy with the fit now, seriously it the best fitting winter jacket I've ever owned/made.
  • The 2 piece sleeves are awesome.
  • I like how its cropped which suits it since its still fairly boxy
  • I like the hood, its roomy but still stays on your head
  • The toggles were a lot easier to make than I thought
  • I love the style and its surprisingly warm!



The bad:
  • I changed so much of the fit that its pretty different jacket now to the envelope version.
  • While the toggles were easy to make they were horrible to sew on - seriously,  follow the instructions and put them on before the fronts are sewn to the back and use a leather needle. I left it too late and it was a nightmare with the extra bulk and trying to sew over the pockets.
  • Speaking of pockets, I would prob do a single welt pocket next time, I found the pockets too big and they sit too high up.
  • I don't really like the lining bagging, I found my hem sags down even with tacking it up at the side/back seams (I ended up hand stitching it in place) so next time I will partially bag the lining but stitch the hems by hand so it can all be catch stitched into place.
  • My fabric was an absolute nightmare - I'd originally added 1" to the body length but even though I'd prewashed, dried and ironed it, the fabric shrunk up by 1" while pressing it so I was really glad I'd added the length.
  • My pattern matching is pretty crap, I barely had enough fabric to get everything cut out and I stuffed up when matching the sleeve pattern to the body, plus the princess seam at the front throws it all out and I'd added the back seam and didn't realise it was off until I'd trimmed it. I'm telling myself a non-sewer won't notice it....
  • I think the reason the cropped jacket is made without the hood is because the hood drags the coat backwards a bit, so it would sit better just with the collar.


Speaking of fabric - the main fabric was from Spotlight, its a double faced fabric sold as poncho material and the black on the yokes is from my stash - I think its a wool crepe. The lining is from Clear It in Melbourne. I interfaced the facings with armoweft and the fronts with whisperweft. I  interfaced the crepe with 2 layers to try and make it handle more like the thicker cotton fabric.


I made my own toggles following the directions from the sewalong - I couldn't find any premade ones anywhere but they were pretty easy to make. I bought a cheap leather jacket from the Salvos, it was half price so it only cost me $4 for a whole jacket so I still have a nice pile of leather for future projects! I really wanted black toggles but again, couldn't find any so I got wooden ones from Spotlight and spray painted them black.


I'm not happy with my stitching on the toggles, but after having to stitch the bottom ones on mostly by hand I decided to live with it! Next time I'll make sure I sew them on flat before the jacket is put together and maybe use my edge foot.


After what seems like a lot of complaining, I am really happy with the finished jacket and I will make one again. Most of the issues I had with this pattern were somewhat my own fault - I knew it was a boxy coat with lots of ease and it was my own choice to make it more fitted. I also should have read the instructions better, the troubles I had with the toggles could have been avoided. But I will make it again, I have a nice teal suiting sitting in my stash that would look awesome...

Monday, July 7, 2014

Colette 1010: Lady Grey coat





 
 
Every time I sew a Colette pattern I wonder why I don't sew more of them, their block fits me perfectly. Case in point - I made a sz18, petited the bodice and added 2" to upper back width (I went a little overboard actually and could have gotten away with about half that I think). I also played with the armholes a bit. I've found a lot of coats I've made have been very binding in the armholes, I used to think it was the arm and back needing more width but I don't think it is. I reckon its to do with having forward shoulders, I need the armholes shifted around a bit, more at the back and less at the front. After I had constructed the bodice muslin I put the coat on and marked where I wanted the armhole to be, and trimmed off about 3/4" at the front. It worked a treat and I have a lot of movement in this coat so it will be something I do to every jacket I make now and its stopped the bunching I normally get at the front armhole.

Fabric is a wool blend suiting from Lincraft. Its a herringbone weave with a dark brown and a light blue that almost looks green in the light. It was really tight to fit it out of the material amount I had, I only had a bit over 2m and the recommended amount is 4m. I did have to piece the back and the belt is a real mish-mash, all the left over scraps I pieced together then fused. It worked out surprisingly well and if you don't look too close its not even noticeably that not all the piece run in the same direction.


Its all fusibly tailored, I used armoweft and fused the front, side front, facings and upper back plus all the hemlines. The lining is sunsilky and a left over scraps for the arms. I haven't done a jacket with a free hanging lining before, came up surprisingly pretty.


I used bias binding and piping for the edges (it was from the Alannah Hill outlet in Melbourne).
.


I was disappointed with the pockets, they are quite small and mine hung down under the lining (I had to tack them up). If I made it again I would change the pockets, maybe make them square and secure them into the front seamlines, or do single welt pockets.


I've had a bit of a blogging break, unintentional and it stretched longer than I thought. I tend to get a bit wrapped up in my hobbies and with blogging its easy for me to fall into the trap of sewing because I blog instead of blogging because I sew. So it was nice to remind myself that's not what blogging is about and to have some unpressured sewing. I do think I will start blogging more of my wadders and muslins that didn't work out, just as a reminder to myself of what works and what doesn't.
I'm glad to be back again though!

Thursday, September 12, 2013

Vogue 8940: Mens Peacoat





I've never sewn for my husband, he's very much a jeans and t-shirts man. However he doesn't have any coats and when I saw the new Vogue patterns I scooped this one up. It's a nice simple peacoat with some cool details.


The fabric is a navy coating I picked up from Spotlight on clearance. It's very soft and sewed up beautifully, the colour is true in the top 4 photos (the detail pics are a bit washed out looking). Lining is Sunsilky from Lincraft and the buttons were from there too.


I followed the instructions all the way through (for once!), they are very similar to the RTW sewalong with interfacing on the front, side, back yoke, collars and facings. The lining is semi-bagged with the hems being hand sewn. I actually enjoyed the control this gave me over how well it all fit together. It has inseam pockets at the front and a welt pocket inside.


I'm still disappointed in the inside welt pocket. I managed to sew the welts on the wrong way around and had already cut the slit in the facing before I realised.......plus I didn't have enough fabric to recut the front facing and of course Spotlight had sold out of it. So it was carefully unpicked and resewn but you can see some pulling in the lining and its a bit uneven so I'm still not showing any close ups, lets look at the nice notched collar instead!


Fit wise I cut a sz42 which matched his measurements. I muslined it up and had to add width in the arms and the upper back. I remuslined all the changes and then cut the main fabric. Once it was sewn up I got him to try it on and it was massive so it was all unpicked and recut smaller. The final product is a sz 42 with a 2" broad back adjustment and a 2" bicep width adjustment. The chest and length are all straight from the pattern and fit him fine (he's 5'11"). If/when I make it again I'll be adding a little to the forearms and to the pocket opening width (I always tell him he has bear paws not hands so the pocket openings are a bit too small)


Each time I do a decent size broad back measurement I usually gather the back shoulder seam and ease it into the front, this tends to make the upper back creep forward at the back of the arms. Because this jacket also has a dropped front shoulder seam it seemed to exaggerate this so I put in a topstitched pleat instead of the gathers which made it sit a lot nicer (pleated is on the left, gathered is on the right)


I did flat piping around the facings. I'd been given a big bag of my hubbies late Grandfathers ties so I used one of them to make bias strips out of for the piping. This worked really well and there was enough fabric in the tie to make the piping and the welts for the inside pocket.


Speaking of the facing, the pattern doesn't include a back facing so I drafted one. It also doesn't include a jump pleat in the back lining. Not sure if this is normal in men's jackets?? I added a 1" jump pleat anyway.


I did notice the pattern asks you to cut 2 inside pocket lining pieces but you only need one (only mistake I found in the pattern).

All in all, I'm really happy with it. I wanted it to look casual but neat and I think it does, best of all it fits him and he likes it!

Wednesday, July 10, 2013

Burdastyle Handbook: Hooded Coat



 

This is the third time I've made this for my daughter, its turned into her TNT coat pattern!
This version is similar to the last one, Sz 42 but I took it in at the waist and lengthened the bodice. I also took a 1/2" tuck out of the front bodice piece and pleated the skirt rather than gathering it. The hood is traced off a hoodie she has that fit well.


The fabric is a stretch drill from the best garage sale ever, its a mint colour but the photos all came out slightly darker than it is in real life. The lining was a satin she picked out, there was only enough to line the body so the sleeves are a poly lining from Great Nan's stash.



Since the skirt section was pleated I hid the pockets in a pleat, copying the directions from the Colette Macaron dress.


The buttons are reused from the first version of this pattern.


The belt was made mostly following Tilly's tutorial except I used elastic instead of interfacing and some press studs. Makes a really cute belt and I"ll be making more!


I did flat piping around the facings again, I really like how it looks and how little bulk it adds compared to normal piping.


Final word from the daughter;